Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 48)

Chapter 5
Configuration Menus
5–7
Aux Baud Rate for COM2 – The following baud rates are available:
38400 1200
19200 600
9600 300
4800 150
2400 75
Aux Parity For COM2 – Parity choices are:
Even
Odd
None
Zero
Mark
Aux CRLF For COM2 – Parameter choices are:
Enable
Disable
Aux Echo For COM2 – Parameter choices are:
Enable
Disable
Comm Menu char – Parameter choices for enabling menu configuration
from a host computer are:
^T
^C
^O
^N
NONE [Default]
This parameter specifies the character that is used from the comm ports to
enter the menu mode. NONE is the default. If the selected character conflicts
with the data transmission between the Host and the Master workstation, then
it may be necessary to select another character to be used to signal the
workstation to enter the menus.
When the NONE option is selected, it is not possible to enter the menus
from the comm ports, nor is it possible to reboot the workstation with
the ^R character.