beautypg.com

Installing the 800a and sealed membrane modules – Rockwell Automation 2705 RediPanel Push Button Module User Manual

Page 31

background image

Chapter 3
Wiring and Installation

3–8

Mounting tabs are built into the Module. After sliding the Module into the
enclosure, the tabs secure the Module until the mounting brackets are in
place. The installation procedure follows.

Mounting Tabs and Brackets

Mounting
Tabs

To install the 800A and Sealed Membrane Modules:

1. Cut an opening in the panel approximately 5.86 inch (148.84mm) H x

8.61 inch (218.69mm) W. See Figure 3.1.

Figure 3.1
Panel Cutout Dimensions in Inches (mm)
800A and Sealed Modules

8.61

(218.69)

Panel Cutout

5.86 x 8.61

(148.84 x 218.69)

3.69

(93.73)

6.375

(161.93)

5.86

(148.84)

0.62

(15.75)

1.06

(26.92)

7.375

(187.33)

9.25

(234.95)

➀ These 2 additional 0.312 inch (7.92 mm) diameter holes are required for NEMA Type 4X

push button modules.

7.00

(177.8)

3.12 (79.25) Dia.

4 Places

0.26

(6.60)

Installing the 800A and
Sealed Membrane Modules