Rockwell Automation 2705 RediPanel Push Button Module - Manual (Page 11)

Chapter 1
Overview
1–4
RediPANEL 800T/800H Modules support Bulletin 800T and 800H 30mm
120 VAC, Class 1, Div. 2 Groups A, B, C, and D devices only. The 800T
devices have a NEMA Type 12/13 rating for applications requiring
protection from oil and dust. The stainless steel faceplate of 800H devices is
designed for NEMA Type 4, 4X applications (hosedown or corrosive
environments).
RediPANEL 800T/H modules are available in 3 configurations:
•
standard
•
custom
•
unpopulated
Standard Configuration
Standard configurations support 16 or 32 illuminated 800T/H push buttons.
Custom Configuration
Custom configurations support any 16 or 32 of the following 800T or 800H
devices:
•
Momentary push buttons, illuminated/non-illuminated
•
Push/Pull push buttons, illuminated/non-illuminated
•
Flush head, extended head or mushroom head operators
•
Pilot lights
•
2 position selector switches, illuminated/non-illuminated
•
3 position selector switches, illuminated/non-illuminated
•
4 position selector switches
•
Hole closing plugs
3 or 4 position devices use 2 RediPANEL inputs (and 2 connector cables),
leaving a physical location with an output bit only. You can either:
1. Reduce the total number of push button devices by one for each 3 or 4
position device. Use a hole plug (Catalog No. 800T-N1B) to cover the
unused hole.
For example, a 16 button module that includes a 3 or 4 position device
can have a maximum of 14 additional push buttons.
2. Use a pilot light adapter cable (Catalog 800T-N309) to install a 3 or 4
position pilot light instead of the hole plug.
The above example would then support an additional pilot light for a total
of 16 devices.
800T/H (30mm)
Push Button Modules