Rockwell Automation 6181X-15xxxxxxx VersaView 6181X-IN001B-MU-P - Manual (Page 16)

16 VersaView 6181H Integrated Display Computers
Publication 6181H-IN001B-MU-P
Power Connections
A standard IEC 320 power cord provides power to the computer. The power supply
input will accept 120/240V AC. The power supply is autoswitching. Ensure that
sufficient power is available at the site.
ATTENTION
Select an electrical source carefully before plugging in your
computer:
• The power cord must be connected to a source having an
earth ground. Failure to follow this warning could result in
severe electrical shock.
• The source you select should have its own disconnect. Do not
connect the computer into a source that is connected to the
main electrical disconnect.
• To prevent problems resulting from power surges or
unexpected power failure, you should protect the source with
its own fuses or circuit breakers, as well as an Uninterruptible
Power Supply (UPS) system.
• Always shut down the operating system prior to removing
power. Failure to do so will cause performance degradation
and eventual failures in the operating system