Rockwell Automation 1797-XXX FLEX Ex System Certification Reference Manual - Manual (Page 207)

Publication 1797-6.5.6 - June 2005
1797-IE8H FLEX Ex 8 Input HART Analog Module 45-3
Table 2: Flexbus Entity Values Which are Allowed for the Next
FLEX Ex I/O Module
Table 3: Flexbus Entity Values for this Module
Note: Any combination of up to eight FLEX Ex I/O modules may be
attached on a flexbus.
The entity concept allows interconnection of intrinsically safe apparatus
with associated apparatus not specifically examined in combination as a system
when the approved values of V
oc
and I
sc
or V
t
and I
t
of the associated apparatus
IMPORTANT
A terminal base may or may not have an I/O module
installed.
Terminals V
t
(V) I
t
(mA) Groups C
a
(
µF)
L
a
(
µH)
Male Bus
Connector
5.8 400 A-G 3.0 3.0
Terminals V
max
(V) I
max
(mA)
Groups C
i
(
µF)
L
i
(
µH)
Female Bus
Connector
5.8 400 A-D 1.35 0
Hazardous (Classified) Location
Class I, Zone 0 Group IIC, IIB, IIA
Class I, Div. 1 Groups A, B, C, D
Class II, Div. 1 Groups E, F, G
Class III, Div. 1
Hazardous (Classified) Location
Class I, Zone 1 Group IIC
Class I, Div. 1 Groups A, B, C, D
For connection to other
modules, refer to the General
FM Certification Information
on page 38-1.
1797-IE8H
16
Shield Connection Only
50
51
35
34
V max =5.8V
I max =400mA
C i =1350nF
L i =0
V max =9.5V
I max =1A
C i =0
L i =0
Male Bus
Connector
33
40
41
42
43
44
45
0 (+)
Female Bus
Connector
Any Simple Apparatus or FM
approved device with Entity
Concept parameters (V
max
, I
max
,
C
i
, L
i
) appropriate for connection
to associated apparatus with
Entity Concept parameters listed
in Table 1: Entity Values for Field
Device Connections.
1 (sig)
ch0
ch1
ch2
ch3
ch4
ch5
ch6
ch7
2 (-)
4 (+)
5 (sig)
6 (-)
8 (+)
9 (sig)
10 (-)
12 (+)
13 (sig)
14 (-)
17 (+)
18 (sig)
19 (-)
21 (+)
22 (sig)
23 (-)
25 (+)
26 (sig)
27 (-)
29 (+)
30 (sig)
31 (-)
42056
For connection to other
modules, refer to the General
FM Certification Information
on page 38-1.
From FM approved devices,
1797-PS1N, -PS2N, or
-PS2N2.