Rockwell Automation 1797-XXX FLEX Ex System Certification Reference Manual - Manual (Page 175)

Publication 1797-6.5.6 - June 2005
General FM Certification Information 38-3
Electrostatic Charge Protect the system against electrostatic charge. Post a sign near each module:
Attention! Avoid electrostatic charge. For your convenience, a sign which
can be cut out and posted is included in this chapter.
FM I/O Entity Parameters If this product has the FM mark, it has been designed, evaluated, tested, and
certified to meet the following standards:
• FM C1. No.3600:1998, Electrical Equipment for Use in Hazardous
(Classified) Locations General Requirements
• FM C1. No.3610:1999, Intrinsically Safe Apparatus and Associated
Apparatus for Use in Class I, II, III Division 1 Hazardous (Classified)
Locations
• FM C1. No.3615:1989, Explosionproof Electrical Equipment General
Requirements
• FM C1. No.3810:1989, 1995, Electrical and Electronic Test, Measuring
and Process Control Equipment
• ANSI/NEMA 250, 1991, Enclosures for Electrical Equipment
Repair Modules are not field-repairable. Any attempt to open a module will void the
warranty and the IS certification. If repair is necessary, return the module to
the manufacturer.
Attention: Avoid electrostatic charge.