Rockwell Automation 1797-XXX FLEX Ex System Certification Reference Manual - Manual (Page 145)

Publication 1797-6.5.6 - June 2005
1797-OE8H FLEX Ex 8 Output HART Analog Module 30-3
IMPORTANT
A terminal base may or may not have an I/O module
installed.
1797- OE8 Allen-Bradley
B - A
OUT 1 OUT 0 OUT 2 PWR OUT 7 OUT 6 OUT 5 OUT 4 OUT 3
4
8 CHANNEL ANALOG OUTPUT
FLEX Ex Analog
Output I/O Module
LEDs
Female Bus
Connection
Field Wiring
Terminals Terminal
Base
Terminal
Base Key
Male Bus
Connection
Key Position for
Terminal Base
Insertion
42013
To any intrinsically safe
device or associated
apparatus with Entity
Concept parameters of
V
oc
< 5.8V; I
sc
< 400mA.
T o any intrinsically safe
device or associated
apparatus with Entity
Concept parameters of
V
oc
< 9.5V; I
sc
< 1A.
To any IS device with Entity
Concept parameters of
(V
max
, I
max
, C
i
, L
i
) appropriate
for connection to associated
apparatus with Entity Concept
parameters listed in Table 2.
1797-OE8
16
Shield Connection Only
50
51
35
34
V max =5.8V
I max =400mA
C i =1350nF
L i =0
V max =9.5V
I max =1A
C i =0
L i =0
Male Bus
Connector
33
40
41
42
43
44
45
0 (+)
Female Bus
Connector
Any Simple Apparatus or I.S.
device with Entity Concept
parameters (V
max
, I
max
, C
i
, L
i
)
appropriate for connection to
associated apparatus with Entity
Concept parameters listed in
Table 1: Entity Values for Field
1 (-)
ch0
ch1
ch2
ch3
ch4
ch5
ch6
ch7
4 (+)
5 (-)
12 (+)
13 (-)
17 (+)
18 (-)
21 (+)
22 (-)
25 (+)
26 (-)
29 (+)
30 (-)
42484
8 (+)
9 (-)
Hazardous (Classified) Location
Class I, Zone 0 Groups IIC, IIB, IIA
Class I, Div. 1 Groups A, B, C, D
Class II, Div. 1 Groups E, F, G
Class III, Div. 1
Hazardous (Classified) Location
Class I, Zone 1 Groups IIC, IIB, IIA
Class I, Div. 1 Groups A, B, C, D
Class II, Div. 1 Groups E, F, G; Class
III