Rockwell Automation 6181 Industrial Computer - Manual (Page 83)

12.1 in. Keypad Bezel Operation
This chapter describes operations specific to the RAC6181 12.1 in.
keypad version. The RAC6181 front bezel assembly consists of a plastic
bezel with overlay and a metal frame assembly that holds the LCD panel
and associated interconnection circuit boards. The RAC6181 keypad
version has removable function key legend strips. This chapter’s topics
include:
•
How to install the keypad legend strips
•
Keypad Configuration Utility (KCU) software
The RAC6181 12.1 in. keypad versions contain three legend strips – one
strip for the horizontal function keys located below the display and two
strips for the vertical function keys located on either side of the display.
Each of these legend strips can be removed and replaced with custom
printed versions. Contact Rockwell Automation for more information on
how to obtain customized legend strips.
The standard legend strips shipped with the product are configured as
follows:
Horizontal strip F1-F14 printed on exposed side,
user-writable surface on the reverse side.
Left vertical strip K1-K10 printed on exposed side,
user-writable surface on the reverse side.
Right vertical strip K11-K20 printed on exposed side,
user-writable surface on the reverse side.
The following replacement legend strips can be ordered from Rockwell
Automation. Each kit contains one each of the three legend strips –
horizontal, left vertical, and right vertical strips. They are configured as
listed above with text printed on one side and a user-writable surface on
the other side.
Part Number Description
6189-2KEYKIT12 12.1 in. bezel legend strip kit (3 pcs)
Chapter
10
Chapter Objective
Installing Keypad Legend
Strips