Rockwell Automation 6181 Industrial Computer - Manual (Page 55)

Installing/Removing the Power Supply 5–3
Publication 6181-UM001D-EN-P
4. Remove the 4 mounting screws that secure the power supply (2-slot
chassis shown below).
5. Remove the power supply.
6. Disconnect the cables that connect the power supply to the input
terminal strip:
•
With the AC option, disconnect the cables from the bottom of
the power supply.
•
With the DC option, disconnect the red and black cables from
the input terminal strip itself. Cut the tie strips that secure these
cables around the fan.