Rockwell Automation Arena Users Guide - Manual (Page 82)

A RENA U SER ’ S G UIDE
74
• •
•
•
•
Report Statistics Specifies whether or not statistics will automatically be collected and
stored in the report database for this station and its corresponding
activity area.
Set Name Name of the station set. A given station set can only exist once within a
model.
Save Attribute Specifies the attribute to be used to store the index into the station set for
an entity entering this module.
Set Members This repeat group permits you to define the individual stations that are to
be members of the specified station set. A station set must have at least
one member station. Active when Station Type is Set.
Station Name This field indicates the name of a station that is to be a member of this
station set. A given station can only exist within a model once. There-
fore, an individual station can only be the member of one station set, and
that individual station may not be the name of a station in another
module.
Parent Activity Area Name of the Activity Area’s parent for the station set member.
Associated Intersection Name of the intersection associated with this station set in a guided
transporter network.
Report Statistics Specifies whether or not statistics will automatically be collected and
stored in the report database for this station set member and its corre-
sponding activity area.
Allocation Type of category to which the entity’s incurred delay time and cost will
be added.
Delay This field defines the delay that will be experienced by entities
immediately upon arrival at the station.
Units Time units used for the delay time.
Transfer In If a resource, transporter, or conveyor was used to transfer the entity to
this station, this can be used to release, free, or exit the device. If
Release Resource is selected, the specified resource is released. If Free
Transporter is selected, the specified transporter is freed. If Exit
Conveyor is selected, the specified conveyor is exited.
Transporter Name Name of the transporter to be freed upon arrival to the station. Active
when Transfer Name is Free Transporter.
Unit Number Unit number of the transporter if the transporter is multi-capacity.
Conveyor Name Name of the conveyor to exit upon arrival to the station.
Prompt Description