Power supply – Rockwell Automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Module User Manual User Manual
Page 86
74
Rockwell Automation Publication 1734-UM018B-EN-P - October 2013
Appendix A Specifications
Power Supply
The 1734-AENT modules have the following power supply specifications:
General Specifications
Attributes
Description
Status indicators
3 red/green status indicators (on CPU):
• – Module status
• – Network status
• – POINTBus status
1 green status indicator on CPU:
• – Network activity
2 green power supply status indicators on DC-DC Converter:
• – System power (5V DC to POINTBus Out)
• – Field power (24V DC from Field In)
Wire Size
Power connections:
0.34... 2.1 mm
2
(22...14 AWG) solid or stranded copper wire rated
@ 75 °C (167 °F ) or greater, 1.2 mm (3/64 in.) insulation max or
90 °C (194 °F ) for ControlLogix.
Ethernet wiring:
RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e
min cable according to TIA 568-B.1 or Category 5 cable according
to ISO/IEC 24702.
Wiring category
(1)
1 – on communications ports
1 – on power ports
Power consumption, max
4.5W @ 28.8V DC
Power dissipation, max
15.5W @ 28.8V DC
Input overvoltage protection
Reverse polarity protected
Thermal dissipation, max
9.5 BTU/hr @ 28.8V DC
Isolation voltage
50V (continuous), Reinforced Insulation Type, between all circuits.
Type tested @ 500V AC for 60 s
Field power supply
10...28.8V DC @ 10A
Field power output
10...28.8V DC @ 9A
Module input
10...28V DC @ 1000 mA
Dimensions (HxWxD), approx.
76.2 x 54.9 x 133.4 mm
(3.0 x 2.16 x 5.25 in.)
Enclosure type rating
None (open-style)
Terminal base screw torque
0.8 Nm (7 lb-in)
Weight, approx.
255 g (0.56 lb)
(1) Use this Conductor Category information for planning conductor routing. Refer to the Industrial Automation
Wiring and Grounding Guidelines, publication
and to the appropriate System Level Installation
Manual.
Power Supply Specifications
Attributes
Description
Input voltage rating
24V DC @ 10 A
Input voltage, range
10...28.8V DC
Field side power, max
24V DC @ 400mA
Inrush current, max
6.0 A for 10 ms