Rockwell Automation 1732E-IB16M12SOEDR EtherNet/IP ArmorBlock supporting Sequence of Events - Manual (Page 41)

Publication 1732E-UM002A-EN-P - March 2010
Configure the Module Using RSLogix 5000 33
Add the 1732E-IB16M12SOEDR as a child of the 1756-EN2T module
1. Right click the Ethernet folder that appears below the 1756-EN2T
bridge you added to the I/O Configuration tree and select New Module.
2. When the Select Module dialog appears expand Digital. Select the
1732E-IB16M12SOEDR module.
3. The Create Module wizard appears.
Fill in the Module Properties information as shown, and then click OK.
A. Select the
1732E-IB16M12SOEDR
module.
B. Click OK.
TIP
If the 1732E-IB16M12SOEDR module is not listed in the digital
section of the Select Module dialog you may need to download
the Add-On Profile (AOP) for the 1732E- ArmorBlock R 2-Port
and install it as an add-on to RSLogix 5000. The AOP file can be
downloaded from:
support.rockwellautomation.com/controlflash/LogixProfiler.asp
Module Definition Dialog Values
Field Name Value
Name My2PortIB16SOEDR_20
IP address 192.168.1.20
Electronic keying Compatible Module
Connection Data
Revision 1.1