Rockwell Automation 1771-TCM,D17716.5.108 TEMPERATURE CONTROL MOD - Manual (Page 73)

Chapter 7
Monitoring Status Data
7-23
Word Description Bits
63 0 LoopĆ1 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ1
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ1.
1 LoopĆ2 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ2
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ2.
2 LoopĆ3 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ3
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ3.
3 LoopĆ4 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ4
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ4.
4 LoopĆ5 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ5
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ5.
5 LoopĆ6 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ6
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ6.
6 LoopĆ7 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ7
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ7.
7 LoopĆ8 AutoĆTuning successful
• 0 = AutoĆtuning was not successful for loopĆ8
• 1 = AutoĆtuning was successful in determining PID gains for loopĆ8.
8-15 Reserved.
64 0-7 Firmware Revision Ċ In ASCII. (A thru Z)
8-15 Firmware Series Ċ In ASCII. (A thru Z)
Words 1 thru 64 of the system status block are identified by the
mnemonics TMS01 thru TMS64 in ProSet 700 software.
To learn how to calibrate the temperature control module, read chapter 8.
What to do next