Rockwell Automation 1746-NI16V SLC 500 Analog Input Modules User Manual - Manual (Page 16)

Publication 1746-UM001A-US-P
2-2 Quick Start for Experienced Users
Procedures
1. Check the contents of shipping box. Reference
Unpack the shipping box making sure that the contents include:
•
analog input module (Catalog Number 1746-NI16)
•
removable terminal block (factory-installed)
•
Installation Instructions
If the contents are incomplete, call your local Allen-Bradley representative for assistance.
2. Ensure that your chassis and power supply support the 1746-NI16 module. Reference
If you are installing the module in a hazardous location, read “Hazardous Location Considerations” on page 3-1.
Review the power requirements of your system to ensure that your chassis supports the module:
•
If you are combining a 1746-NI16 module with another I/O module in a fixed controller, refer to the I/O
module compatibility table found in Chapter 3.
•
For modular style systems, calculate the total load on the system power supply using the procedure
described in the
SLC Installation & Operation Manual for Modular Style Controllers (publication 1747-6.2) or
the SLC 500 Family System Overview (publication 1747-2.30).
•
The 1746-NI16 backplane current consumption is 125 mA at 5V dc and 75 mA at 24V dc.
Chapter 3
(Installation and
Wiring)
Appendix A
(Specifications)