Rockwell Automation 1771-ACNR15 CONTROLNET ADAPTER MODUL - Manual (Page 17)

2–3 Installing Your ControlNet Adapter Module
Publication 1771-6.5.124 – August 1997
You can change the position of these bands if subsequent system
design and rewiring makes insertion of a different type of module
necessary.
Figure 2.1
Keying Band Positions
Upper Connector
ATTENTION: Insert or remove
keying bands with your fingers.
I/O chassis
Keying Bands
Lower Connector
11022-I
Place keying bands between:
•
54 and 56 on the upper connector
•
16 and 18 on the lower connector