Rockwell Automation 1746-MPM INSTALL INSTRUC MOLD PRESSURE - Manual (Page 15)

Mold Pressure Module 15
Publication 1746-5.13 July 1998
9. Troubleshooting with LEDs
LEDs indicate operating conditions detected by the module:
10. Use DARTWin software to display processed data
Refer to the DARTwin Software Instruction and Use Manual.
This concludes the procedures to set up and operate the 1746-MPM module.
In the next section, we present the M0/M1 file listing.
Status: Indicates:
on
loss of a sensor signal, or
lo-level sensor is out of range
on running a machine cycle
flicker transmitting on DartNet
flicker receiving on DartNet
INPUT
TRIGGER 1
FAULT
RxDATA
TxDATA