beautypg.com

Rockwell Automation 1746-MPM INSTALL INSTRUC MOLD PRESSURE User Manual

Mold pressure module

background image

Publication 1746-5.13 July 1998

Installation Instructions

Mold Pressure Module

(catalog number 1746-MPM)

Before you begin

Use this document as a guide to installing and powering-up your Mold

Pressure Module. We assume that you are already familiar with the SLC

500

family of Small Logic Controllers and associated I/O modules.

Tools that you need

1/4” slotted (#2) or phillips screwdriver

needle-nose pliers

Handling the module

Take these precautions to guard against ESD damage:

!

ATTENTION:

Electrostatic discharge can damage the

module. Follow these guidelines:

• touch a grounded object to discharge potential static

• wear an approved grounding wriststrap

• do not touch circuit components inside the module

• if available, use a static-safe work station

• when not in use, store the module in its anti-static bag.

!

ATTENTION:

Do not insert or remove this module while

backplane power is on. An electrical arc may occur that can

cause an explosion in a hazardous environment and/or cause

damage to the module or degrade its performance.