Rockwell Automation 1746-MPM INSTALL INSTRUC MOLD PRESSURE - Manual (Page 10)

10 Mold Pressure Module
Publication 1746-5.13 July 1998
Select the hex-equivalent value from the following table
(
Important: Before operating the module for the first time, you must
download the G file to the module. Do this by downloading your ladder
file, even if it contains no rungs. The SLC processor must be in Program
mode for a download.
Bits 07-00
07-05 04 03 02-00 Chnl 1 Data Source Chnl 2 Data Source Hex
0 0 0 0 sensor sensor xx00
0 1 SLC output image tbl sensor xx08
1 0 sensor SLC output image tbl xx10
1 1 SLC output image tbl SLC output image tbl xx18
Bits 11-08
11 10 09 08 Triggers T4 turns alarms OFF? Alarms OFF when T4 Hex
0 0 0 0 ON NO n/a x0xx
0 0 1 0 OFF NO n/a x2xx
0 1 0 0 ON YES Goes ON at mold close x4xx
0 1 1 0 OFF YES Goes OFF at mold open x6xx
1 0 0 0 ON NO n/a x8xx
1 0 1 0 OFF NO n/a xAxx
1 1 0 0 ON YES Goes ON at mold close xCxx
1 1 1 0 OFF YES Goes OFF at mold open xExx
Bits 15-12
15 14 13 12 Chnl 1 sensor level Chnl 2 sensor level Alarms Hex
1 0 0 0 low low ON 8xxx
1 0 0 1 high low ON 9xxx
1 0 1 0 low high ON Axxx
1 0 1 1 high high ON Bxxx
1 1 0 0 low low OFF Cxxx
1 1 0 1 high low OFF Dxxx
1 1 1 0 low high OFF Exxx
1 1 1 1 high high OFF Fxxx