Rockwell Automation 1336VT 5-300 AMP (2.2-160KW) User Manual
Page 4
![background image](/manuals/578963/4/background.png)
PreĆInstallation Care
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving - Once you have received your drive, careful inspection
for shipping damage must be made. Damage to the shipping carton
is usually a good indication that it has received improper handling.
Any and all damage should be immediately reported to the freight
carrier and your nearest AllenĆBradley Area Sales/Support
Center.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage - If the drive will not immediately be installed, it should be
stored in a clean, dry area where the ambient temperature is not
less than Ć405C nor more than +855C. The drive must not be stored
in a corrosive environment nor subject to conditions in excess of the
storage environment parameters stated in Chapter 4 Ċ
Specifications.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling - Depending upon the rating and options ordered, the
weight of your drive can vary. To guard against injury to personnel,
proper safety precautions and practices must be observed whenever
the drive is being moved from one location to another.
. . . . . . .
Shipping - The carton and materials that came with your drive have
been designed and tested to provide reasonable protection against
damage during transit. Should the drive be shipped to another location,
it is recommended that the original shipping carton and packing
material be used to protect the drive from damage in transit.
. . .
Electrostatic Discharge - Electrostatic discharge generated by static
electricity can damage the
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions - Complimentary metallic oxide semiconductor devices
on various drive boards. It is recommended that you perform these
procedures to guard against this type of damage when circuit boards
are removed or installed:
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wiring
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents