Preinstallation care, Prećinstallation care – Rockwell Automation 1336VT 5-300 AMP (2.2-160KW) User Manual
Page 13
1
Chapter
1-1
PreĆInstallation Care
Before installing and operating your 1336VT, carefully read this manual
and observe all precautions. The catalog number of your drive as explained
in Chapter 2 — Drive and Option Identification lists the drive rating, type
of enclosure, nominal line voltage, phase and frequency, as well as any
additional options that you may have specified. Specifications for all drives
including standard controls, adjustment range, diagnostics and
environmental qualifications are listed in Chapter 4 — Specifications.
Receiving
Once you have received your drive, careful inspection for shipping damage
must be made. Damage to the shipping carton is usually a good indication
that it has received improper handling. Any and all damage should be
immediately reported to the freight carrier and your nearest Allen-Bradley
Area Sales/Support Center.
Carefully unpack the drive, taking care to save the shipping carton and any
packing material should return be necessary. Verify that the items on the
packing list or bill of lading agree with your order.
Storage
If the drive will not immediately be installed, it should be stored in a clean,
dry area where the ambient temperature is not less than -40
°
C nor more
than +85
°
C. The drive must not be stored in a corrosive environment nor
subject to conditions in excess of the storage environment parameters
stated in Chapter 4 — Specifications.
Handling
Depending upon the rating and options ordered, the weight of your drive
can vary. To guard against injury to personnel, proper safety precautions
and practices must be observed whenever the drive is being moved from
one location to another.
Shipping
The carton and materials that came with your drive have been designed and
tested to provide reasonable protection against damage during transit.
Should the drive be shipped to another location, it is recommended that the
original shipping carton and packing material be used to protect the drive
from damage in transit.