Western Digital My Book Live Duo User Manual - Manual (Page 67)

MY BOOK LIVE DUO
USER MANUAL
CONFIGURING BASIC SETTINGS – 61
2. If you have made any changes, click the Save button.
Updates
This section of the page enables you to set up the drive to update the firmware automatically
or to manually check for an update file:
A description, current version number, and date of last update of the My Book Live Duo
Firmware display.
Check for Update
To manually check for new firmware availability and to optionally install new firmware:
1. Click the Check for Update button. The “Checking” message displays. If an update is
found, click OK.
2. If desired, click the Install & Reboot button. A progress bar displays. When the process
is complete, the network drive reboots.
Update from File
To update the firmware manually:
1. Go to the WD Tech Support Downloads page at http://s upport.wdc.com/product/
download.asp .
2. On the Downloads page, select Network Storage.
3. Select My Book Live Duo.
4. A firmware file is provided. Download the file and save it to your desktop.
5. On the Updates tab. click the Update from file button.
Time This field appears if the NTP Service check box is not
selected.
From the drop-down list, select the current hour, minutes,
and time period (i.e., AM, PM).
Important: Wait for the My Book Live Duo drive to finish powering up
(approximately three minutes) before configuring the drive. You will
know it is ready when the LED turns solid or blinking green (normal) or
blue (standby).