Western Digital My Book Live Duo User Manual - Manual (Page 133)

MY BOOK LIVE DUO
USER MANUAL
REPLACING A DRIVE – 127
11. Close the door and firmly push in until it locks into place.
12. Reconnect all of the cables for the device.
13. The drive starts the rebuild process automatically. The RAID rebuild may take up to 15
hours depending on drive capacity and activity, but typically will complete in 7 to 12
hours. Allow the RAID rebuild to complete.
14. Once the RAID rebuild is complete, the LEDs will glow steadily to indicate power-on
state.
15. Return the replacement drive following the instructions provided in Knowledge Base
Answer ID 8.
Important: Do not attempt to use the device during the rebuild process.
Important: Do not disassemble the internal drive and attached assembly components.
Return the entire internal drive assembly intact to WD.