Western Digital My Book Live Duo User Manual - Manual (Page 66)

MY BOOK LIVE DUO
USER MANUAL
CONFIGURING BASIC SETTINGS – 60
1. View or modify the following settings:
2. If you made any changes, click the Save button that appears below the section.
Note: Throughout the My Book Live Duo dashboard, the Save and Cancel buttons
display only if you make changes.
Date & Time
The date and time are synchronized to the NTP (network time protocol) server by default.
You have the option of setting the date and time manually or allowing the NTP to access the
Internet and automatically set the time. If you are not connected to the Internet, you must
enter the date and time manually.
1. View or modify the following settings:
Device Name Enter a unique name for your drive to identify it on the
network.
Device Description The default description is My Book Live Duo device. If
desired, enter a different description.
Language From the drop-down list, select the language in which you
want the My Book Live Duo web pages to display. The
default language is English.
Serial Number Displays the WD-assigned number that identifies the
specific unit.
Usage Displays the storage capacity used and the total storage
capacity.
Warranty
Registration Click Register Now and follow the prompts to register
your drive.
Time Zone From the drop-down list, select the time zone where your
drive is located.
NTP Service Select the check box to enable NTP service, which
automatically synchronizes your drive to update the time
and date.
If you want to change to another primary NTP server, click
Add New Primary, and then enter the URL address of
the new primary server.
Date This field appears if the NTP Service check box is not
selected.
From the drop-down list, select the current month, day,
and year