Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 99)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 99 of 108
6. WI Series checks the unit’s current configuration to determine if the user configuration is
valid. If the user configuration is valid and the module is currently configured to use its
factory configuration, WI Series shows the following message to let you select the
configuration to load:
7. Click Yes to factory configuration or click No to select previously stored (i.e. inactive) user
configuration. You can also click Cancel to return to the previous screen without loading
either configuration from the module.
8. WI Series checks the unit address of WI-I/O 9-L-T modules and shows a warning
indicating the new unit will be created with a secondary unit address as it has the same
address as another WI-I/O 9-L-T module:
9. Click OK to continue or click Cancel to return to the previous screen without loading the
information.
10. If you load from a module with an address already used by another unit in the
configuration, WI Series shows a message indicating the problem:
11. Click OK to acknowledge the error and re-check the unit address.
12. WI Series loads the information and shows a message indicating the load completed
successfully:
13. Click OK to acknowledge the message.
14. You can now work with the unit configuration.