Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 90)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 90 of 108
! &
After configuring the modules, you can check for errors by compiling the system.
Note
The system is also compiled before any data is programmed to any of the modules. It is
not necessary to compile the system before configuring modules.
Compiling the system:
Checks - your system configuration;
Reports - any errors; and
Generates - configuration files for each unit.
After compiling the system, you need to upload the configuration files to the units. For more
information, see Loading configuration information into a unit on page 93.
To compile the system:
1. Open the project.
2. Select
Utilities » Compile System .
3. WI Series shows the System Compile page:
4. Click Compile to compile the system or click Close to quit without compiling
the system.