Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 49)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 49 of 108
% " % " # "
To load a new unit from an already-configured module:
1. Open the project.
2. Connect the module that you want to load to one of your PC serial ports using the
Weidmuller, Inc. RS-232 serial cable.
3. Select the serial port that has the cable connected by clicking on the Com Port field
and selecting the appropriate port from the list that appears (this step can be skipped if
the correct serial port is already selected):
4. Click Load a New Unit or select Unit Options » Load into New .
5. WI Series prompts you for the unit type:
6. Select the unit type you want to load.
7. Click OK to load the new unit or click Cancel to return to the previous screen
without loading the new unit.