Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 37)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 37 of 108
5. Enter the password (6 to 256 characters) you want to use for the project and then re-
enter to confirm the password.
Note
The password can be between 6 and 256 characters long and is case-sensitive. You
can enter any ASCII characters (including letters, numbers, other keyboard characters,
etc.).
To ensure the password remains confidential, WI Series shows a hash character (i.e.
“#”) for each letter or number entered; WI Series never shows the password in plain text.
6. Click Set Field to set the new value or click Cancel Field to keep the original
value and leave the password entry page.
7. Click OK to save the password for the project.
Note
If you do not enter the same password when confirming, WI Series shows the following
warning:
Click OK to acknowledge the message and re-enter the password.
Note
If you do not click Set Field to set the password, WI Series shows the following
message:
Click OK to acknowledge the message and leave the password entry page.
8. WI Series sets the password and shows a message indicating the password is active:
9. Click OK to acknowledge the message.
10. Click OK to leave the password entry page.