Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 75)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 75 of 108
To set setpoints:
1. Open the project.
2. Select the unit you want to change.
3. Select
Setpoints .
4. WI Series shows the setpoints:
5. Double click the setpoint you want to change or select the setpoint and click Edit
Setpoint .
6. WI Series shows the setpoint:
7. Set the setpoint threshold values as required
8. Set the new value and click
OK to save the setpoint or click Cancel to return to the
setpoint list without changing the setpoint.
9. WI Series writes the new setpoint values to the module when you next configure it.