Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 93)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 93 of 108
/
After compiling the system, you need to transfer the configuration information to a unit.
The basic steps for transferring the configuration information to the unit are:
Step Description For more information,
see …
1. Connect the unit to the
PC
Lets you connect the unit to your PC using an
RS-232 serial port so you can transfer configuration
information between your PC and the unit.
Connecting the unit to the
PC on page 94.
2. Set the serial port Lets you set the serial port used when transferring
information to the unit.
Setting the serial port on
page 95.
3. Programming the unit Lets you load the configuration information from the
PC to the unit.
Programming the on
page 96.
(optionally) Transfer the
configuration
information
Lets you transfer the configuration information from
the unit to the PC.
Transferring information
from the module the PC
on page 98.
For more information, see the next sections.