Talos Security DR08 DVR Manual - Manual (Page 70)

Digital Video Recorder User Manual
55
5.5.2 Advanced
Enter into Main MenuDisk ManagementAdvanced. User can check the hard disc
model, S/N, firmware, health status and S.M.A.R.T information. S.M.A.R.T function
can monitor the
disk’s temperature, internal circuit and dielectric material, analysis the
potential problems and warn so as to protect its data.
5.6 Upgrade
Upgrade steps:
1) Copy the upgrade software into the USB disk, then connect USB disk to the USB
port of DVR.
2) Enter into Main MenuUpgrade. Click "Refresh" button to refresh the list, and the
name of upgrade software is displayed in the upgrade list.
3) Select this name, click
“Upgrade” button to start upgrading. Please wait for the
system to restart.
Note: Don't cut off the power in the process of formatting! The device supports
USB update only when the USB is compatible with DVR (refer to Appendix C
Compatible Devices). After the upgrade is complete, restart the system to
activate.
Note: There can only be one upgrade package in USB disk; if no device or file
exists in the upgrade list, it is caused by the incompatible USB disk.
5.7 Logoff
Enter into Main MenuLogoff. Click OK button to log off, click Cancel button to exit
the warning window. To log in again, user needs to enter the user name and password
in the login screen to log in device.