Talos Security DR08 DVR Manual - Manual (Page 41)

Digital Video Recorder User Manual
26
4-26. The setup steps of motion trigger are similar to the sensor alarm handling; user
can refer to Chapter 4.6.1 SensorAlarm handling for more details.
Step 3: Click
“Setting” button of motion area to pop up a window, as shown in Fig
4-27:
Fig 4-26 motion-trigger setting Fig 4-27 motion-area setting
Due to the sensitivity is influenced by color and time (day or night); user can drag
slider to adjust the sensitivity of motion detection (1-8) according to the practical
situation.
Click button to set the whole area as detection area; click button to clear
detection area; click button to test whether the sensitivity and motion area are
suitable; click button to save the setting; click button to exit current
interface.
Step 4: Select
“all” and then do relevant setup, user can set all channels with same
parameters.
Step 5:
Click “Default” button to
restore the default
setting; click “Apply” button to
save the setting; click “Exit” button to exit current menu.
① Schedule
The schedule of motion detection is shown in Fig 4-28.
The setup steps of motion detection schedule are similar to schedule; user can refer
to 4.5.1 Schedule for details.
Note: The default schedule of sensor alarm is full-selected, that is, the color of
schedule setting interface is blue.