4 .9 listen-in time, 4 .9 .1 programming the listen-in time, Sensaphone – Sensaphone 800 User Manual
Page 60: Press enter. the model 800 will respond: “enter, Enter
Sensaphone
®
Model 800 User’s Manual
58
4 .9 Listen-in Time
The Listen-in Time is the amount of time you can listen to sounds
from the Model 800’s built-in microphone at its installation
site. When you call in for a Status Report, the Model 800
announces Listen-in Time at the end of its first round of status
readings, saying, “Listen for (programmed time entered).” The
programmable range is from 0 to 255 seconds (or up to 4.17
minutes). The default value is 15 seconds.
NOTE
The microphone is also used to monitor high sound
level. See Chapter 5, Section 5.10 through Section
5.11.1.
4 .9 .1 Programming the Listen-in Time
To program the Listen-in Time:
1. Press SET.
SET
2. Press LISTEN TIME. The Model 800 will respond: “Enter
seconds.”
9
LISTEN TIME
SOUND
3. Using the number keys, enter the seconds. The Model 800 will
recite the digits as they are pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. Press ENTER. The Model 800 will respond: “Enter.”
ENTER
PM