Sensaphone 800 - Manual (Page 53)

Chapter 4: Communications Programming
51
Example:
SET + PHONE NUMBER + any unassigned number key 1-8
+ telephone number + CODE + 2 + extension number + ENTER
Code 3 Switch to Touch-tone
This command allows you to change from pulse dialing to touch-
tone dialing in the middle of dialing a telephone number. This is
useful when your telephone service only supports pulse dialing,
but you need to send touch-ones after connecting – such as when
dialing a numeric pager or navigating a voice menu.
Example:
In this example a telephone number is dialed, the Sensaphone
waits for the call to be answered, then changes to touch-tones to
dial an extension.
SET + PHONE NUMBER + any unassigned number key 1-8 +
telephone number + CODE + 2 + CODE + 3 +
extension number + ENTER
4 .6 .2 Incorporating a Pause
Incorporate PAUSE to access an outside telephone line:
1. Press SET.
SET
2. Press PHONE NUMBER.
PHONE
NUMBER
T/P