Sensaphone 800 User Manual
Page 106
Sensaphone
®
Model 800 User’s Manual
104
8 .1 .1 To program the Output Mode:
1. Press the SET key.
SET
2. Press the OUTPUT key.
OUTPUT
PAUSE
AM
The 800 will say “Enter output mode.”
3. Using the number keys, enter a value for the output mode.
Mode Description
6
Output on when zone 6 goes into alarm. Off when alarm is
acknowledged.
7
Output on when zone 7 goes into alarm. Off when alarm is
acknowledged.
8
Output on when zone 8 goes into alarm. Off when alarm is
acknowledged.
9
Output on when a Sound alarm occurs. Off when alarm is
acknowledged.
0
Output on when a Power alarm occurs. Off when alarm is
acknowledged.
Phone Output on when phone line is unplugged for more than 15
seconds. Off when a phone line is plugged in.
*
Output on when any alarm occurs. Off when all alarms are
acknowledged.
#
Output controlled manually via keypad command or touch-
tone telephone. (default)
Code Output on when any alarm occurs, except for when a phone
line is unplugged. Off when all alarms are acknowledged.