Sensaphone 800 - Manual (Page 102)

Sensaphone
®
Model 800 User’s Manual
100
Local, On-site
Acknowledgment
Touch-Tone
Acknowledgment:
Fast Code 555
Touch-Tone
Acknowledgment:
Normal Code 555
Tone or Pulse
Callback
Acknowledgment:
Within Intercall
Time
IV . The Alarm Is Acknowledged Variable Factors
• At any time after a valid alarm
is determined, the alarm may be
acknowledged at the Model 800’s
installation site, by pressing ALARM
CANCEL key.
• When the Model 800 dials out and
the call is answered via Touch-Tone
telephone, any alarm may be instantly
acknowledged by pressing “555.”
• If the alarm message repeats for
the number of programmed Voice
Repetitions, and “555” has not been
entered, the Model 800 will say:
“Enter acknowledgement code.”
The Model 800 waits 10 seconds for the
Touch-Tone code “555” to be entered. If
the code is entered within 10 seconds, it
responds:
“Alarm acknowledged.”
The alarm is considered acknowledged
and the dialout concludes.
• If the Model 800 does not receive the
Touch-Tone code within 10 seconds, it
recites the following:
“Error, enter acknowledgement code.”
If the Model 800 does not receive the
acknowledgement code a second time,
it says “error, goodbye” and hangs up.
The recipient of this message must call
the Model 800 back within the period
programmed for Intercall Time, in order
to acknowledge the alarm. If Local
Voice Mute is off, the unit will beep at
the installation site while waiting for this
call.
• Callback Acknowledgement: If enabled,
the Model 800 waits 10 rings before