Sensaphone 800 User Manual
Page 125
Appendix B: Troubleshooting
123
4.
The
Model
800
does
not
recognize
any alarm.
5.
The
batteries
drain
prematurely.
a)
Zones
for
alarm
are
disabled.
b)
Programmed
Recognition
Time
is
too
long.
The
unit’s
AC
transformer
is
unplugged
or
for some other reason, full AC power is not
available to the unit.
Enable the zones for alarm.
Refer
to
Chapter
5,
Section
5.2.
Reprogram
Recognition
Time.
Set
the
Recognition
Time
to
the
minimum
required
for a monitored condition to become a valid
alarm. If possible, test the condition by delib
-
erately creating an alert condition.
Refer
to
Chapter
5,
Section
5.3.
The
batteries
will
take
over
powering
the
unit
when the AC transformer is unplugged from
the 120 VAC outlet. When storing the unit, be
sure to remove the batteries.
Refer
to
Chapter
2,
Section
2.4.
Be sure to use alkaline batteries—do not
use rechargeable batteries.