Sensaphone 800 - Manual (Page 37)

Chapter 3: Quick Start
35
3. Select which telephone number to program. Press any
unassigned number key (from 1 to 8) to represent the new
telephone number entry. Model 800 will respond: “Enter
number.”
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
4. Enter the complete telephone number using the number keys.
The Model 800 will recite the digits as they are pressed.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
5. Press ENTER. The unit will respond: “Enter.”
ENTER
PM
6. Repeat above procedure to program up to eight separate
telephone numbers.
Step 4: Set Temperature Limits
High and low temperature limits can be separately programmed
for each zone that is configured as temperature. Limits can range
from –20° to +150° Fahrenheit, or from –30° to 65° Celsius.
Default settings are: 10° F for low temperature and 100° F
for high temperature. Do not set temperature limits too close to
normal room temperature, since minor fluctuations could result in
frequent and unnecessary alarm dialouts.