4 .5 tone or pulse dialing, 4 .6 special dialing, 4 .6 .1 special dialing keys – Sensaphone 800 User Manual
Page 51
Chapter 4: Communications Programming
49
4 .5 Tone or Pulse Dialing
The Model 800 can dial out in pulse or Touch Tone™. Select the
type of dialing, in either pulse or tone, depending upon the type of
service provided by your telephone company. The default is tone.
To program for either pulse or tone:
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press PHONE NUMBER T/P.
PHONE
NUMBER
T/P
The Model 800 will respond: “Tone” to indicate that tone dialing
is enabled, or “Pulse” to indicate that pulse dialing is on and
enabled.
3. Repeat key sequence to switch between settings.
4 .6 Special Dialing
The Model 800 has provisions for special dialing sequences.
Special dialing sequences allow:
• Dialing that requires an access number to connect with an
outside line.
• Dialing that requires the pound (#) or star (*).
• Dialing to a beeper or pager.
4 .6 .1 Special Dialing Keys
The following designated keys represent special functions when
used with PHONE NUMBER entries:
1. Pause
OUTPUT
PAUSE
AM
PAUSE represents a two-second pause in dialing. It can be used
when an access number is required before dialing to an outside
line. (For example, in some cases a “9” or other number, must be
dialed first, in order to get a dial tone for an outside line.)