Instruction sheet – Prescolite SLIP STRAP User Manual
Page 2

www
.prescolite.com
• Prescolite
TollFree
Technical Support
1.888.PRS.4TEC
• Hours: 8am - 5pm ET
101 Corporate Drive • Spartanburg, SC 29303
With representatives offices in principal cities throughout North America.
Copyright 2005, 08/05 revision, All Rights Reserved - Printed in U.S.A.
Part No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02003300
Instruction
Sheet
SLIP STRAP INSTALLATION -
HOUSING WITH PLASTER FLANGE
Fig. 1
Fig. 1
1. Insert slip straps thru tabs on plaster
flange.
Fig. 2
2. Overlap ends of two sections, placing
tabs on each section into hole in
opposite section.
Fig. 3
3. Push sections together so tabs engage
sides of slots.
4. Adjust slip straps to approx. joist width.
5. Align bottom of bar hangers with bottom
of joist and hammer tabs in place.
NOTE: Aligning bottom of bar hanger
tabs with bottom of joist allows flush trim
installation with 1/2" sheetrock.
6. Slide housing on bar hangers to proper
location between joist and bend up. V
Shaped Retainer Tabs (1) ea. corner.
Fig. 3
Fig. 2