Instruction sheet, Prs.4tec – Prescolite CFT857HEB User Manual

Page 2

www

.prescolite.com

• Prescolite

TollFree

Technical Support

1.888.PRS.4TEC

• Hours: 8am - 5pm ET

101 Corporate Drive • Spartanburg, SC 29303

With representatives offices in principal cities throughout North America.

Part No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157940100

Instruction

Sheet

Socket

Mounting

Bracket

Upper

Reflector

Wing Nut

(Supplied

W/ HSG)

Lens

Lower

Reflector

Spring (3)

Install the Housing Per Instructions on Page 1
1. Reflector Istallation, 2-Piece Reflector:

After all

ceiling installation and finishing work is complete.

Place the upper reflector in the plaster flange

aperture, the large lamp opening in the side of the

reflector is to be on the same side as the socket.

Insert the stud on the socket mounting bracket

through the center hole in the top of the reflector.

Secure the upper reflector with the wing nut

supplied with the housing.

2. Install the proper lamp, (by others).
3. Install the lower reflector by placing the reflector in

the plaster flange aperture. Push the reflector

upwards until the flange on the reflector is flush

against the finished ceiling. Allow the three

reflector springs to retain the lower reflector

against the ceiling.