Prescolite LB6LEDA10L - Manual (Page 2)

In
s
tr
u
c
tio
n
S
h
e
e
t
Part No...........................................
With representatives offices in principal cities throughout North America.
Copyright , revision, All Rights Reserved - Printed in U.S.A.
701 Millennium Blvd • Greenville, SC 29607
w
w
w
.p
re
s
c
o
lit
e
.c
o
m
P
re
s
c
o
lit
e
T
o
ll
F
re
e
T
e
c
h
n
ic
a
l S
u
p
p
o
rt
1
.8
8
8
.P
R
S
.4
T
E
C
H
o
u
rs
: 8
a
m
-
5
p
m
E
T
93039951
2013 06/04/13
WARNING – Risk of fire or electric shock. Do not alter, relocate, or remove wiring, lampholders, power supply, or any
other electrical component.
WARNING – Risk of fire or electric shock. LED retrofit kit installation requires knowledge of the construction and operation
of the luminaires electrical systems and the hazard involved. If not qualified, do not attempt installation. Contact a
qualified electrician.
WARNING – Risk of fire of electric shock. Install this kit only in the luminaires that have the construction features and
dimensions in photographs and/or drawing, minimum. Recessed housing dimensions are 6-5/16 in. diameter by 5-1/2 in.
WARNING – Do not make or alter any open holes in an enclosure of wiring or electrical components during installation.
Suitable for use with luminaires with a minimum of 75°C supply conductors.
The retrofit kit is accepted as a component of a luminaire where the suitability of the combination shall be determined by
CSA or authorities having jurisdiction.
THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE
COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAVING JURISDICTION.