Pololu Maestro User Manual
Page 10
Mini Maestro 18-channel USB servo controller (fully
assembled) labeled top view.
Mini Maestro 24-channel USB servo controller (fully
assembled) labeled top view.
Note: This section applies to the Mini
Maestro 12, 18, and 24 servo controllers.
Please see
for Micro Maestro
pinout and component information.
The
Pololu
Mini
Maestro
12-,18-,
and
24-channel servo controllers can connect to a
computer’s USB port via a
(not
included). The USB connection is used to
configure the servo controller. It can also be used
to send commands to the servo controller, get
information about the servo controller’s current
state, and send and receive TTL serial bytes on
the TX and RX lines.
Pololu Maestro Servo Controller User's Guide
© 2001–2014 Pololu Corporation
1. Overview
Page 10 of 73