Pololu USB AVR User Manual

Page 15

Text mode
Original mode

Building a project with Atmel Studio 6.

5. Make sure your USB AVR programmer is connected to your computer via its USB A to mini-B cable and
then select Add target… from the Tools menu. Select STK500 as the tool. Select the COM port that has been
assigned to the programmer’s programming port, and click Apply. If you are not sure which COM port to select,
look in the Device Manager under the “Ports (COM & LPT)” list. This step can be skipped if you have done it
before.

Pololu USB AVR Programmer User's Guide

3. Getting Started in Windows

Page 15 of 54