Opticon OPN 2002 v35315 Bluetooth demo Quick Guide - Manual (Page 8)

8
Screenshot of entering a passkey (a.k.a. PIN-code) on a Windows device
If successful, the OPN2002 should now be successfully paired with your remote Bluetooth
device and the Virtual Com port ready to be used.
To be able to scan and transmit barcodes as serial data, open the Bluetooth Virtual Com
port on your remote device to establish the connection with the OPN2002
If you've lost your connection or closed the Virtual Com port, then the OPN2002 will stay
connectable for about 2 minutes*. After those 2 minutes, use the small key to make the
OPN2002 connectable again and allow the remote device to re-establish the connection.
To manually end your connection, press the small clear key for 5 seconds to disconnect
your OPN2002.
* The labels below allow you to change the time that the OPN2002 will stay connectable