Opticon OPN 2002 v35315 Bluetooth demo Quick Guide - Manual (Page 11)

11
Other OPN2002 applications
Besides this Bluetooth demo application there are 3 other OPN2002 applications available
on our web site that might fit your specific application better.
1. Software V35106: OPN2001 simulation demo application
This application turns the OPN2002 into an OPN2001 compatible batch scanner.
Besides USB, any stored barcode data can also be retrieved from the OPN2002 by using
Bluetooth.
Use this OPN2002 application in combination with the OPN2001 Demo application for
Windows (or develop your own application using the SDK that's available for the
OPN2001).
Note: When planning to use the OPN2002 solely as on standard OPN2001, so without
Bluetooth or need to run other applications, please note the following (hardware)
differences:

The battery of the OPN2002 empties quicker than the battery of the OPN2001 when
rarely used. Approximately the OPN2002 can operate normally for about 30 days when
it's rarely used.

The OPN2002 does not support laser aiming (laser dot)

The OPN2002 can not change its scan angle to shorten the laser line

Unlike the OPN2001, the OPN2002 will lose its time and date within 4-5 days after the
OPN2002 becomes non-operational due to an empty battery, which is sooner than the
OPN2001. When this occurs, this will cause the time to be reset to 1-1-1970 00:00. If
the OPN2002 isn't regularly used, it might be necessary that, before retrieving any
barcode data, the current time is read from the OPN2002. If the retrieved time doesn't
match the time of the PC, then the correct time can be send to the OPN2002 and
incorrect time/date stamps of barcode data can be corrected using the difference
between the time of the OPN2002 and the PC.
2. Software V35412: Batch demo application (USB & CRD-2000 multi-cradle)
This software turns the OPN2002 into a batch scanner that can transmit it data as a file by
either USB or the CRD-2000 multi-cradle.
Use this application in combination with the NetO32 Windows application.
The output format of the barcode file (comma separated) can be configured using the set-
up chart that can be found in the included manual.
Note: Application source code is publicly available for editing using the SDK
3. Software V35531: OPR3301 main Bluetooth application
This application has been developed for the OPR3301 barcode scanner, but it also
compatible with the OPN2002.
This application is very similar to the application described in this manual, but supports
more of Bluetooth options that are listed in the Universal menu book.
This application is recommended when the OPN2002 is used as replacement for the old
OPL2724 / OPL7724 and when memorizing of barcodes is desired if the OPN2002 lost its
Bluetooth connection or is out-of-range.
Notes:
 This application can be found in the download section of the OPR3301.
 No source code will be available for editing