Memmert PM 200/400/500 Pump Module (Generation 2003) - Manual (Page 46)

VO page 46
Note:
The programme remains stored on the MEMoryCard XL after the card has been removed from the unit. It
can however be overwritten at any time by the PC using “Celsius 2007”.
Details on programming the MEMoryCard XL with PC and “Celsius 2007“ can be found
in the Celsius Operating Manual and in the Online Help.
27.4 Documentation on MEMoryCard XL
The actual temperatures can be documented continuously on the MEMoryCard XL while the programme is
running from the chip card. After the programme has been completed they can be read and printed using
“Celsius 2007”. The operation is described in the “Celsius 2007” Operating Manual.
A certain amount of storage space is provided for documentation depending on the programme duration.
The sampling rate is set automatically by the controller depending on the programme duration.
With a programme duration up to 270 hours the documentation of the actual values on the MEMoryCard
XL takes place with a 1-minute cycle. With programmes of longer duration the sampling time is extended
up to 30 min max.
Documentation is started afresh on each programme start; the old report data are overwritten.