Memmert PM 200/400/500 Pump Module (Generation 2003) - Manual (Page 22)

VO page 22
Programming example “Weekly programmer“
The oven (VO500) has to switch on at 07.30 hrs from Mo to Fr (workday group) and switch off at 18.00
hrs. In addition it has to operate on Saturday from 10.00 to 14.00 hrs.
Mo Sa Fr Th We Tu Su
1. Select operating mode “Weekly programmer“
After holding down the SET key (approx. 3 sec) the current operating
mode is flashing. Select operating mode “Weekly programmer“ with
the push/turn control while holding down the SET key.
After the SET key has been released the controller is in operating mode
“Weekly programmer“.
PRINT SETUP
2. Switch on at 07.30 hrs Mo-Fr
Turn the push/turn control anticlockwise to select the symbols “Mo-Fr
on“ (workday group).
Hold down the SET key and use the push/turn control to set the switch-
on time to 7:30.
Sa Su
off
Mo Tu We Th Fr
h
on
3. Switch off at 18.00 hrs Mo-Fr
Using the push/turn control select the symbols “Mo-Fr off“ (workday
group).
Hold down the SET key and use the push/turn control to set the switch-
off time to 18:00.
Sa Su
on
Mo Tu We Th Fr
h
off
4. Switch on at 10.00 hrs Sa
Using the push/turn control select the symbols “Sa on“.
Hold down the SET key and use the push/turn control to set the switch-
on time to 10:00.
Mo Tu We Th Fr Su
off
Sa
h
on
5. Switch off at 14.00 hrs Sa
Using the push/turn control select the symbols “Sa off“.
Hold down the SET key and use the push/turn control to set the switch-
off time to 14:00.
Mo Tu We Th Fr Su
on
Sa
h
off