Memmert PM 200/400/500 Pump Module (Generation 2003) - Manual (Page 16)

VO
set
off
on push card
PRINT SETUP
loop
t3
t4 t2
t1
on
off
Mo Tu We Th Fr Sa Su
3
4
2
1
STERI DEFRO
°C °C
rh
mb
% CO
mb
2
IN 1 IN 2 OUT IN 1 IN 2 OUT
MIN
AUTO
MAX
page 16
10 Controls and indications
12 Switching on
The oven is switched on by pressing the push/turn control.
13 Setting the temperature
Hold down the SET key and set the temperature setpoint with the push/turn control.
After the SET key has been released the display briefly flashes the temperature setpoint. The display then
changes to the actual current temperature and the controller starts to control to the selected temperature
setpoint.
open
close
11 Operating the door
The door is opened by pulling on the door handle.
The door is closed by the door handle being pushed in.
Oven switched off. The push/turn control is pushed
in and protected against damage. Oven switched on and can be operated using the
push/turn control and the SET key.
thermoshelves
pressure display temperature
display
operating mode
indication
time
display
alarm indication
push/turn control
(main switch)
SET key chip card reader
monitor temperature
indication
text display
open
close