Memmert PM 200/400/500 Pump Module (Generation 2003) - Manual (Page 30)

VO page 30
22 Basic oven settings
SETUP
PRINT SETUP
In this operating mode it is possible to make the basic settings of the oven. Clock time, date, day, year, and
settings of sounder, of address assignment, monitoring units, heater power and calibration are set here.
The following parameters can be selected by turning the push/turn control, and altered as described in the
Section „Setting the parameters“ :
Clock time in 24-hour format
The winter/summer time changeover does not take place automatically
but must be set manually by the user.
h
Date
The controller incorporates a calendar which automatically allows for
the different lengths of the months and also for leap years.
Weekday
Mo
Year
Range: from 2000 to 2100
Audible signal at programme end
Setting: OFF or ON
Audible signal on alarm, e.g. overtemperature
ALARM SOUND
Setting: OFF or ON
Communication address
Range: 0 to 15
(see Section: „Communication interface”)
Tolerance margin ASF
Range: 2 to 20 °C
(see Section: „Temperature monitor”)