Introduction, 1 description, 2 system requirements – Memmert CELSIUS 10.0 User Manual

Page 6

CELSIUS 10.0

1. Introduction

1.1

Description

CELSIUS is a computer programme for the programming, control and logging of MEMMERT

ovens with an RS-232, or alternatively RS-485, USB or Ethernet interface.
With CELSIUS, you can

►

Create, change and save tempering profiles on your computer in graphical or tabular

form.

►

Control one or more MEMMERT ovens via one or more serial interfaces and log the current

values. up to eight ovens can be controlled via RS-232 or USB, and if RS-485 or Ethernet

interfaces are used (not for ovens of the E class), you can control up to 16 ovens simulta-

neously;

►

if your oven is equipped accordingly, you can use the functions of the MEMoryCard XL,

i. e. to store a tempering profile on a MEMoryCard XL, as well as load tempering profiles

and protocols from a MEMoryCard XL, display this on the monitor and save it to a differ-

ent data medium (hard drive, USB stick);

►

read out, manage and document the internal ring protocol memory (1024 kB) of the

MEMMERT ovens;

►

print out tempering profiles and accompanying protocol data (depending on the oven

type, temperature, humidity, vacuum, CO

, O

, fan speed, air flap position and switch

contacts, see page 7 ) including GLP data, graphically or numerically.

1.2 System

Requirements